I walked by this lamp the other day and couldn't believe how long I had let it go on being this ugly.... It needs a makeover...
 |
| Lamp Before |
I think I might have everything it needs. A can of flat black spray paint, painters tape, Fabric to cover the shade ( surely I can find something in all that fabric I have).
I set out that very moment to paint the lamp. First I wiped it down with a cloth... (Note: do a really good job of wiping it down it seems I missed a spot that I had to go back and sand and paint again because it had some goo or slick something on it probably left over from some toddler mishap). I used the painters tape and taped off the socket and the cord so I the over spray wouldn't get on them.
 |
| Ready to paint |
Then after the little goo mishap I sanded that spot down and painted it again.
Now the lamp shade. Sorry I don't have a before of the lamp shade except for the ugly before picture at the top of the page. I soon found out that it really needed help while I was looking at it the binding around the top and the bottom of the shad just fell off in my hands. Well, that helps... At first I had decided on using burlap to cover the shade. So, much for the fabric stash. I don't have any burlap YAY! off to shop for fabric... When I got to hobby lobby burlap happened to be on sale! (another YAY!), except they don't have the natural color I wanted. So, I looked around and decided on the unbleached natural muslin. I am going to just cover over the existing fabric on the shade.
I put the lampshade on freezer paper and traced it while turning the shad so I would have the shape I needed to cut the fabric. I went back and added a half inch to both the top and the bottom so I could turn the edges in when gluing it on the existing shade. I cut out the freezer paper pattern and ironed it on my fabric so it wouldn't slip around while trying to cut the fabric.
 |
freezer paper pattern ironed on muslin fabric
I cut out the fabric and removed the freezer paper. Using fusible tape I ironed a hem on one edge (just the edge that would be on the outside. I was covering the raw edge where I started with the finished hem. I used my scissors and made a little snip every two inches in the fabric that would be on the bottom of the shade(I did not make the snip more than a half inch long because that is what is going to be turned under) . I did the same snips in the fabric that would be around the top of the shade but I did them every inch. Next, I broke out the glue gun. I glued down the raw edge from the top of the shade to the bottom. I then folded under the fabric on the bottom (between two of the snips I made )and glued it on the inside of the shade. I proceeded with this until the bottom was completely glued all the way around the shade. I then started with the top. While gluing the top I smoothed the fabric and pulled it tight while gluing it so it would look nice. Sorry no pictures of this step. I did a lot of mumbling dirty words under my breath while getting hot glue burns on my fingers... Here is the shade on the painted lamp.

painted lamp and recovered shade |
 |
unbleached natural muslin covered shade
Humm... It still needs something. Off to the craft closet to see what I can find to help the shade out. Ah Ha... twine, in the natural burlap color I originally wanted. Get out the hot glue gun again... I wrapped the twine around the bottom of the shade several times gluing it as I went. I did the same around the top and then I went back and added the twine flowers. What do you think?
finished lamp
|
 |
| close up of finished shade |
Linking Up To: